Pre-Flight Checklist ← BackThank you for your response. ✨ Date of Flight (YYYY-MM-DD)(required) Pilot in Command(required) Select an option Drew Willings Purpose of Flight Select an option Commercial Recreational Location Preparation Check Weather Check Airspace Received LAANC Approval (if necessary) Check NOTAMs Check for TFR Create Flight Plan Preflight Aircraft Inspect Batteries for Damage Verify Battery Charge of All Components Check Batteries for Firmware Updates Check for Aircraft Firmware Updates Check for Control Station Firmware Updates Inspect All Rotors for Wear Tighten All Screws and Parts Perform Any Necessary Maintenance Log All Maintenance and Repairs in Logs Ensure Any Attachments Maintain COG Ensure UAS Registration Visible on Aircraft Set UAS Return to Home Altitude Set Maximum Altitude for Flight Ensure SD Card in Inserted in Aircraft Ensure SD Card has Available Memory Remove Gimbal Cover Remove Propellor Strap Flight Area Inspection Inspect Area for People Inspect Area for Animals Check Overhead for Any Aircraft in Flight Check for Hazards Notify Persons of Flight Plan FAA Flight Requirements Do Not Exceed Manufacturer Requirements Fly Below 400 AGL at All Times Fly VLOS at All Times Pilot in Command Must Know All FAA Rules and Regulations Only Fly at Night with Appropriate Strobe Lighting No Sustained Flights Over People Never Fly Over Stadiums in Use Maximum Flight Speed of 87kts (100 mph) Maximum Weight of 55 lbs Minimum of 3 Miles of Visibility No Hazardous Materials Attached to UAS Notes Submit Δ
